|
afterhoursny
Upstate Underground Moderator
1779 Posts |
 Posted - 04/28/2010 : 09:14:18 AM
|
This is my basic DJ setup for the APC40 and Ableton Live 7.0. It consists of Ableton only effects and requires no VSTs/AUs to run.
I would suggest using some sort of limiter on the master channel. I placed a Compressor on the master but prefer the sound of after-market VSTs personally. I use PSP Vintage Warmer 2 to get a much warmer sound on my master.
For each DJ set, I start with this then I will add effects that I feel will work with the set. So I did not include any send/return effects in this template. Use what you think works best for you.
Requirements:
live_dj_setup.als : Live 7.0
live_dj_setup_psp_warmer.als : Live 7.0, PSP Vintage Warmer 2
Akai APC40
SETUP
3 main DJ Channels
Channel 4 is blank
Channel 5-7 Acapellas,loops and efx
each channel has a “DJ Mixer” rack with following functions
1 – DJM 800 style filter
2 – Super Luper loop Length
3 – Super Luper Nitrous effect
4 – Fade 2 Grey
5 – Bass EQ
6 – Mid EQ
7 – Hi EQ
8 – Gain
-rack consists of the following effects…
1. Utility set to -6db (this allows faders to be used at full volume)
2. EQ 3
3. Fade To Grey
4. Super Luper
5. ALDJM8000
MIDI MAPPED KNOBS/BUTTONS/FADERS
Scene Launch 1-5 = Turn Super Luper on off for channels 1-5
Stop All Clips = removed function so this will no longer stop all cips
Track Control Knobs 1-4 = DMJ800 Filter for Channel 1-3,5
Track Control Knobs 5-8 = Super Luper Length 1-3,5
Rec Arm 1-8 = Track View of Playing Track 1-8
Play = Loop on/off
Stop = Loop Position
Rec = Loop Length
You can download the .als @
http://donstone.sinsationsound.com/?p=578 |
|
APC40 Setup version 2.0
